Farm Equipment - D21 Puller Ring and Pinion swap

Print Page | Close Window

D21 Puller Ring and Pinion swap

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=14197
Printed Date: 25 Apr 2024 at 11:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D21 Puller Ring and Pinion swap

Posted By: Mark D.
Subject: D21 Puller Ring and Pinion swap
Date Posted: 21 Jun 2010 at 9:25pm

Wondering how much is involved in pulling the pinion shaft out. Does it slip out the back or do you need to remove the trans?? Its been a while since I have been into it. Thanks!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Replies:

Posted By: DrAllis
Date Posted: 21 Jun 2010 at 10:21pm

Rearend has to be split from the 4-speed tranny. Axles come out first and drop down the bull gears.....remove the brakes completely........then remove the bull pinions......then lift out the bull gears......then remove the differential/ring gear......then the pinion shaft/gear. 210/220 pinion has 10 teeth versus the D21 9 tooth.

Posted By: dhexom
Date Posted: 22 Jun 2010 at 8:27am

iF YOU ARE TURNING THIS D-21 INTO A PULLER DO YOU HAVE THE PTO SHAFT FOR THAT TRACTOR AS A FRIEND NEEDS ONE LET ME KNOW CAN CALL ME AT 1-608-558-2111. THANKS DAVE

Posted By: Mark D.
Date Posted: 22 Jun 2010 at 4:26pm

Sorry, that stuff is all long gone. Sadly, 12 years ago it was a "parade ready" tractor. According to Sumerix prices today, we could have tripled our money on it too!!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Posted By: SbarBRanch
Date Posted: 22 Jun 2010 at 6:07pm

I have a D-21 series 2 that I would sell e-mail me at sbarbranch@yahoo.com