B final drive seal and bearing #s
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=127907
Printed Date: 27 Apr 2024 at 5:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B final drive seal and bearing #s
Posted By: Jonny B 1938
Subject: B final drive seal and bearing #s
Date Posted: 27 Aug 2016 at 11:39am
|
Well I got one side apart on my 39 B with HA gear drop boxes. Does anyone have a list of the required bearings and seals for the final drives? I tried crossing the Allis part numbers and got nothing so I thought I would ask the orange gurus before I drag it all down to Motion Industries for match up. Thanks..... Jon
|
Replies:
Posted By: wbecker
Date Posted: 27 Aug 2016 at 6:42pm
B FINAL DRIVE BEARING AND SEAL #s
Rear axle
Outer cone 368
outer cup 362
outer seal 415001
inner cone 14138A
inner cup 14276
Pinion shaft
outer cup 14676
outer cone 14138A
inner cup 14276
inner cone 14138A
seal 450456
The numbers on the cone and cup are standard bearing numbers, not Allis numbers.
Bill B
-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152
|
Posted By: Jonny B 1938
Date Posted: 28 Aug 2016 at 1:06am
|
Thanks, the numbers on my stuff are hardly legible, the seals are pretty beat up from disassembly and weathering and my eyes are not that great either LOL.
|
Posted By: Jonny B 1938
Date Posted: 29 Aug 2016 at 9:20am
|
Another "SUPRISE", three of the bearings and races measured the same so I guess I got another odd ball. The outer axle bearing is of course larger but the others are identical. The numbers were etched in on most of the stuff and are unreadable after rust and heating from removal.
|
Posted By: wbecker
Date Posted: 29 Aug 2016 at 1:55pm
Yes 3 bearings are the same. No surprise.
Bill B
-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152
|
Posted By: Jonny B 1938
Date Posted: 30 Aug 2016 at 1:27pm
|
OH OK by the numbers they appeared different, a couple numbers above did not come up on the Motion site so I was kinda confused till I started to look at it.
|
|