Farm Equipment - D17 PUMP DRIVE

Print Page | Close Window

D17 PUMP DRIVE

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=118599
Printed Date: 19 May 2024 at 6:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 PUMP DRIVE

Posted By: jeickman
Subject: D17 PUMP DRIVE
Date Posted: 05 Feb 2016 at 6:53pm

Is it possible to convert a D17 Series III to series IV live hydraulics by replacing clutch pressure plate, drive line components etc with series IV parts?

Replies:

Posted By: Pat the Plumber CIL
Date Posted: 05 Feb 2016 at 8:38pm

I am not sure , would get more responses in farm equipment section

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.

Posted By: DSeries4
Date Posted: 05 Feb 2016 at 9:24pm

I think you would have to get a complete torque tube from a Series IV. To work with it, you would also need the valve body, lines and console ... Probably easier to sell your Series III and buy a IV.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080