Print Page | Close Window

fuel in oil

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115485
Printed Date: 10 May 2024 at 11:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: fuel in oil
Posted By: R.KYLE
Subject: fuel in oil
Date Posted: 30 Nov 2015 at 8:16pm
I HAVE AN HD11F. THE TRACTOR HAS AN 11000 ENGINE IN IT. IT HAS AN AMERICAN BOSH INJECTION PUMP. FUEL IS LEAKING INTO BASE OF ENGINE. ANYONE ELSE HAD THIS PROBLEM AND HOW TO FIX. THANKS.



Replies:
Posted By: CAL(KS)
Date Posted: 30 Nov 2015 at 8:29pm
transfer pump seal is bad, leaking fuel into lubed side of pump and going back to engine?  or leaking onto the outside?

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: R.KYLE
Date Posted: 30 Nov 2015 at 8:38pm
LEAKING INSIDE. DOES PUMP HAVE TO BE REMOVED?


Posted By: CAL(KS)
Date Posted: 02 Dec 2015 at 3:37pm
transfer pump bolts to outside of psb pump  i had a 7000 engine that was doing this



-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: R.KYLE
Date Posted: 02 Dec 2015 at 4:38pm
THIS IS NOT COVERED IN THE BOOK I HAVE BUT I DO HAVE A DIGIRAM OF PUMP. IT LOOKS LIKE THE SUPLY PUMP CAN BE TAKEN OFF WITHOUT REMOVING INJECTION PUMP FROM ENGINE AND GETTING INTO PUMP TIMING. ALSO WONDERING WHERE TO ORDER SEALS. ANY HELP THANKS.


Posted By: Lazyts
Date Posted: 03 Dec 2015 at 7:40pm
Jobbers Inc used to have some American Bosch stuff, www.jobbersinc.com


Posted By: Ian Beale
Date Posted: 04 Dec 2015 at 2:24am
Been here with an AC 45 grader.

You can take the transfer pump off without removing the injection pump.  And the seal on the transfer pump shaft ours was just a standard industrial seal.

Hope this helps


Posted By: CAL(KS)
Date Posted: 04 Dec 2015 at 10:21am
i got my seal from injpumpED

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15


Posted By: R.KYLE
Date Posted: 03 Jan 2016 at 4:17pm
JUST AN UPDATE. GOT A NEW PUMP FROM JOBBERSINC .COM. TRACTOR IS RUNNING AGAIN AND WORKING FINE. THANKS EVERY ONE FOR HELP.


Posted By: Lars(wi)
Date Posted: 03 Jan 2016 at 4:24pm
would be good idea to change the oil and filter if you hadn't.

-------------
I tried to follow the science, but it was not there. I then followed the money, and that’s where I found the science.


Posted By: Richard66
Date Posted: 18 Jan 2024 at 8:34pm
Does anyone have any information about an American Bosh PSB6A-75y-4123A fuel pump? I’m getting fuel in my motor oil on a WD45



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net