hx35 core?
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=100930
Printed Date: 03 May 2024 at 8:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hx35 core?
Posted By: Mrgoodwrench
Subject: hx35 core?
Date Posted: 24 Jan 2015 at 5:37pm
|
Is there any value in a hx35 turbo that was replaced because itvwas loosing oil into the engine? It was removed from a tusk 10k lb. Forklift with a 6 cyl Cummins. ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Replies:
Posted By: studer automotive
Date Posted: 24 Jan 2015 at 11:34pm
|
Not a whole lot, they are pretty common ------------- a-c 185-d y/r cab turbo soon 99 f-250 7.3 4x4 86 mustang5.0 owned since 8/93 |
Posted By: Mrgoodwrench
Date Posted: 25 Jan 2015 at 8:32am
|
OK it just seemed too good for the scrap pile. The new one cost round $2k. ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Posted By: O.P.S. Heads
Date Posted: 25 Jan 2015 at 12:56pm
| Does it have the waste gated exhaust housing? It's not worth much, but is worth something. Don't throw it in the iron pile just yet. |
Posted By: Mrgoodwrench
Date Posted: 25 Jan 2015 at 3:58pm
|
I'm not sure I'll have to look again. I don't know a lot about turbos, there is a place where there is three holes two outer are tapped, I assumed it was for an oil line. ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Posted By: Mrgoodwrench
Date Posted: 26 Jan 2015 at 5:18pm
|
Looks like a no on the waste gate. So now what's it worth? ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Posted By: Beirnesy
Date Posted: 26 Jan 2015 at 6:09pm
put it in the "Healing Bay" with the rest of your half worn out parts and forget about it ! ! !  ------------- 1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716 |
Posted By: Mrgoodwrench
Date Posted: 26 Jan 2015 at 8:22pm
|
Ya I'll toss it on the shelf...ya never know. Can they be resealed easily? ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Posted By: MATPA47
Date Posted: 26 Feb 2015 at 6:40pm
| They are cheap to reseal, I usually have a pump shop do it because i don't have the right tools, |