New to me H3
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=100731
Printed Date: 27 Apr 2024 at 2:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New to me H3
Posted By: dustinmo
Subject: New to me H3
Date Posted: 20 Jan 2015 at 6:53pm
|
Sorry but no pics as of yet, but I just got home (sunday) with my new to me H3 loader with backhoe, hadnt ran in a few years but yesterday (I thought it was locked up as we couldnt turn it by hand) I hooked a set of jumpers on it and low and behold she whirlled over, checked the points and cleaned rotor and cap and squirted a littled either in the carb and she fired, put some gas in it and replaced fuel line and she fired up , filled up the hyd tank and raised outriggers and boom and loader bucket, unchained it and backed it off the trailer, clickey clacked it around a little bit, I am Happy Happy Happy, I need to replace the manifold, rebuild the carb, probally clean fuel tank and pump, do a little sheetmetal work, probally a few hyd hoses and we will see what she'll do. we have 5 of theser little buggers now, I just really like them, got this one for 1840 dollars and have a little over 100 bucks in fuel and 2 trailer tires in it as of now but I dont think thats too bad
http://s1246.photobucket.com/user/dustinmo/media/011_zpse0485729.jpg.html" rel="nofollow">
 http://s1246.photobucket.com/user/dustinmo/media/012_zps8fd7d435.jpg.html" rel="nofollow">
 |
Replies:
Posted By: Randaleky
Date Posted: 20 Jan 2015 at 7:56pm
| SOUNDS OK TO ME |
Posted By: JohnCO
Date Posted: 20 Jan 2015 at 8:38pm
|
Good Deal! Did the trailer come with it? Have fun.
------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: dustinmo
Date Posted: 20 Jan 2015 at 8:50pm
| No that was the d15 I got the other day in indy (totally kidding) |
Posted By: darrel in ND
Date Posted: 21 Jan 2015 at 10:53am
| I can see you were probably wearing a grin that would take plastic surgery to remove! Darrel |
Posted By: BradRisen
Date Posted: 21 Jan 2015 at 11:53am
We Need Pictures!!!!! I Want one!!! 
|
Posted By: dustinmo
Date Posted: 23 Jan 2015 at 6:19pm
| I put you a couple pic on here |
Posted By: Dgrader
Date Posted: 23 Jan 2015 at 7:17pm
| That's a neat little machine. You did good. Be nice to have one. |
Posted By: sandman2234
Date Posted: 24 Jan 2015 at 7:20am
|
I could use one to get unstuck!! Good deal, nice, really nice! David from jax ------------- A proud member of the Allis Express movement! Northeast Florida |
Posted By: Dgrader
Date Posted: 24 Jan 2015 at 6:22pm
| Dustin, just a question. You said you have 5 of them. Do you work all of them or stand back and admire them. |
Posted By: JohnCO
Date Posted: 24 Jan 2015 at 11:50pm
|
I was wondering about the WD in the background that seems to be sinking into the ground. Isn't it a Diesel? Something wrong with it?
------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: dustinmo
Date Posted: 25 Jan 2015 at 12:10am
|
one is torn down for complete rebuild, engine tranny rear as all hyds have already been done as well as clutches and brakes, when we started to use it NO 2nd or 3rd gear and she smoked like a trojan. its a 6way, another h3 hasnt been used in a couple years its a loader with 3pt, last time I tried I was digging a pond out and it just wanted to sink as was a little too heavy, so traded neighbor some backhoe time for some trackhoe time, I used my loader to move some stuff for him and I used a hoe he borrowed to dig my pond out. another has a shuttle issue, its a loader with a winch runs great just doesnt want to move all the time just havent has any time to fix and last is the little hd3 never even tried to start it was told it ran but just loaded it up and unloaded it at home, its a loader with rear weights, will probally get torn apart so I can put engine in a d15 and torque tube swapped with shuttle problem one, they are just too small to do any real work, just like looking at them. dad has a hd11 if we need to work and we have a d grader when we need to blade something, as well as a couple 615 backhoes if we need to dig, so I guess they are really just something to look at, I just really like ac stuff dont care what it is just as long as its allis
here is the little 6 way blade one when we had it torn apart for all 20 some hyd hoses, new clutches, steels, throwout bearings, seals in rear and brakes,
http://s1246.photobucket.com/user/dustinmo/media/DSC02334.jpg.html" rel="nofollow">
 here is the one with shuttle issues
http://s1246.photobucket.com/user/dustinmo/media/DSC02337.jpg.html" rel="nofollow">
 and here is the hd3
http://s1246.photobucket.com/user/dustinmo/media/DSC02336.jpg.html" rel="nofollow">
 I dont think I have a pic of the one at my place
|
Posted By: dustinmo
Date Posted: 25 Jan 2015 at 12:16am
|
JohnCO wrote:Posted By: Dgrader
Date Posted: 25 Jan 2015 at 7:15am
|
Like your pics. And I'm with you'ya can't beat an allis. My son-in-law has a D grader and I love to use it. Cleaned ditches out this fall till it got to wet. It's a gas & we talked about putting a diesel in it but the gas is in good shape so I think we'll leave it the way it is. |
Posted By: Dgrader
Date Posted: 25 Jan 2015 at 4:28pm
| Dustin if you're lookin for another H3 just saw one on St Louis craigslist. Said it was in Sullivan Mo. It's got quite the operators seat. |