track and sprockets - grab hold of the bushing and feel how round it is - are both lower and upper feel round ? Is there a sharp dividing line between the 2 sides ? Are there worn bushings to point they are thin enough they are cracked or worn through.
You can measure between pin centers of 4 links to see how much wear is on internal pin and bushing .
Looking at the picture - the track looks good as no excessive sag over carrier roller .
Sprocket wear is next - how does track pins lay into sprockets - are sprocket teeth worn even or are tips sharp or flat -
Seems like fair price if it runs evenly and moves and steering clutches work so each track will cause machine to turn when pulling clutch and applying brake on that side .
Topic Options
Post Options
Thanks(0)
