This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
715 backhoe tranny trouble |
Post Reply |
Author | |
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
Posted: 29 May 2015 at 10:07pm |
Our 715 started making a grinding sound in 3rd gear last fall. As we kept using it, it got to where it was doing it in 1st and 2nd also. 4th gear was fine, didn't make any noise at all. Today I decided to take out the tranny and see what was going on. 1st,2nd and 3rd gear were all in good shape but 4th was a mess. The teeth were ground off from the front of the case, leaving about a half inch left back by 3rd gear. I'm thinkin when in the first 3 gears there's enough slop in 4th to make the grinding sound. But in 4th there's enough teeth left to make it run smooth. I hope this makes sense just trying to figure out what's goin on. Any thoughts would be appreciated. Thanks.
|
|
Ya cain't fix stupid.
|
|
Sponsored Links | |
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41187 |
Post Options
Thanks(0)
|
Sounds like box needs to be gone through and check forks are putting gears in proper position
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Yeah Coke, I dropped the tranny and found bearings went out on bottom shaft. Found a used tranny and put it in and everythings workin fine. Would you know where to find the parts to rebuild our old one? Torque converter was made by borg warner and I'm assuming tranny was too.
|
|
Ya cain't fix stupid.
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41187 |
Post Options
Thanks(0)
|
can check if any part numbers might match with truck units used by ford .
might be couple individuals on here that can source parts also either in MI or Canada also MINNPAR might have lead - bearing should be easy to find . |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Thanks Coke. I'll check it out. Preciate it.
|
|
Ya cain't fix stupid.
|
|
ivan
Silver Level Joined: 12 Sep 2009 Location: NE Michigan Points: 319 |
Post Options
Thanks(0)
|
we can help 989-379-2721
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41187 |
Post Options
Thanks(0)
|
See - Ivan seems to be able to step in on many of these things
|
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Ok ivan. Not sure what we're gonna do yet. If we rebuild we'll give ya a call. Got othet stuff to fix first.
|
|
Ya cain't fix stupid.
|
|
Dgrader
Orange Level Joined: 17 Jan 2015 Location: Newton,IL Points: 1037 |
Post Options
Thanks(0)
|
Ivan, you wouldn't have a muffler for the ol girl would ya. It was shot and put a straight pipe on. Gotta quiet it down.
|
|
Ya cain't fix stupid.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |