![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
agco dealer |
Post Reply ![]() |
Author | |
chris 21 ![]() Bronze Level ![]() Joined: 07 Jul 2015 Location: wisconsin Points: 16 |
![]() ![]() ![]() ![]() ![]() Posted: 29 Jul 2015 at 10:00pm |
I went to my local agco dealer looking for some parts today for my 41 wc. It seems that things are no longer available. Have been looking for the seal between torque tube and rear diff pinion. Also packing seal between Trans output shaft and torque tube. Not sure where to look next. O-rings?
|
|
![]() |
|
Sponsored Links | |
![]() |
|
matador ![]() Orange Level ![]() ![]() Joined: 10 Nov 2014 Location: Wyoming Points: 1727 |
![]() ![]() ![]() ![]() ![]() |
I'd try Sandy Lake Implement, and see if they have what you need in the back...
|
|
![]() |
|
SHAMELESS ![]() Orange Level ![]() ![]() Joined: 13 Sep 2009 Location: EAST NE Points: 29486 |
![]() ![]() ![]() ![]() ![]() |
the new agco dealers don't want anything to do with the old! they will even give you part numbers so you can order parts elsewhere!
|
|
![]() |
|
Bill Long ![]() Orange Level ![]() Joined: 12 Sep 2009 Location: Bel Air, MD Points: 4556 |
![]() ![]() ![]() ![]() ![]() |
Seems a shame. Very sorry to hear that report.
I agree with Madator. Check out Sandy Lake. They are one of the advertisers on this page and are outstanding. Good Luck! Bill Long |
|
![]() |
|
Sugarmaker ![]() Orange Level ![]() ![]() Joined: 12 Jul 2013 Location: Albion PA Points: 8172 |
![]() ![]() ![]() ![]() ![]() |
Agreed Sandy Lake (Brenda) may be able to help? Also you may have to get the sizes and order from a seal place like KAMAN?
Regards, Chris (63) :) |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
![]() |
|
JimIA ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Castalia Iowa Points: 1979 |
![]() ![]() ![]() ![]() ![]() |
Unless Im mistaken aren't those both cork packings? If not, do you have the part numbers? Dealer your dealer search other dealers or the Depot?
Sounds like this dealer looked up the parts, the fact that they are not available are no surprise to me, the tractor was built in 1941. Go to your Chevy dealer and ask to get parts for your 1970 pickup and let me know how that works for you. |
|
An open eye is much more observant than an open mouth
|
|
![]() |
|
MrHDC ![]() Orange Level ![]() ![]() Joined: 14 Mar 2015 Location: Wichita, KS Points: 254 |
![]() ![]() ![]() ![]() ![]() |
Walked into the local AGCO dealership here with a list of about a dozen or so parts needed for a CA hydraulic pump. Walked out with everything I needed and change from a $100 bill.
Not all AGCO dealers are created equal. Hervey |
|
![]() |
|
JimIA ![]() Orange Level ![]() ![]() Joined: 12 Sep 2009 Location: Castalia Iowa Points: 1979 |
![]() ![]() ![]() ![]() ![]() |
Got a little time to look. If I am correct the first part is the gasket between the two housings? Part number 70202569 which is discontinued. But you can make that with gasket material from NAPA. The second number is 70202860 which is a cork ring and is discontinued. Im wondering if you cant take the specs of the ring and find rubber square ring to fit in its place or again check with NAPA and see if you can get a thicker cork gasket material and cut a ring out?
Hope that helps. Jim |
|
An open eye is much more observant than an open mouth
|
|
![]() |
|
DennisA (IL) ![]() Orange Level ![]() Joined: 11 Sep 2009 Location: Ridott IL. Points: 2064 |
![]() ![]() ![]() ![]() ![]() |
Say what you will about AGCO and it's dealers.
Just keep in mind that we are looking for parts that go on 20,30,40,50,60 & 70 year old equipment. We should feel lucky when the dealers can get the parts. Any way I put out an ask to find the drawbar anchors that bolt to the final drives of my D-14. Made calls and sent emails with no luck. I turned to my local AGCO dealer this past Wednesday and AGCO had the parts and I got them on Friday. The parts are pictured below. Also keep in mind that must of the guys behind the parts desk were still nursing after this equipment was used. Also, not all AGCO dealers dealt with Allis Chalmers equipment so they do need a little help. If you can give them part numbers up front this is a big help. |
|
Thanks & God Bless
Dennis |
|
![]() |
|
HD6GTOM ![]() Orange Level ![]() ![]() Joined: 30 Nov 2009 Location: MADISON CO IA Points: 6627 |
![]() ![]() ![]() ![]() ![]() |
Chris try Allen at R&R Equiptent. Indianola Iowa-- he had all that stuff for the WD45. He is closing down at the end of this month after 40+ years. 515-961-5326. He is wanting to move everything he has left--may be some deals????
|
|
![]() |
|
cnafarms ![]() Silver Level ![]() ![]() Joined: 01 Jul 2011 Location: Mt. Airy, MD Points: 140 |
![]() ![]() ![]() ![]() ![]() |
I wouldn't blame it all on the dealers. The one I deal with never sold Allis but they don't mind looking up parts for me or when I have the part number do everything they can to get it. Have even givens other dealers numbers that have or have the part at least listed for me to call. Always been a big help even when they aren't making a nickel off of what I'm asking for. The crazy part is they told me that the corporations, they do both agco(Massey, New Idea) and new holland equipment, that the big corporate bosses don't want to supy parts for anything older than 7 years old. The guy at the counter told me I need to buy a news machine joking around. I told him show me a new tractor that'll still b around 50 years after its made a still running just as well as the day it came off the assembly line and I'd buy it. He told me to stick with my D-17. I like dealing with them Mullinix & sons in Dayton, MD with anybody close. They are a great group of guys to deal with
|
|
![]() |
|
DiyDave ![]() Orange Level Access ![]() ![]() Joined: 11 Sep 2009 Location: Gambrills, MD Points: 50810 |
![]() ![]() ![]() ![]() ![]() |
I agree, mullinex is good people, too, but sandy lake is my favorite, further away, and get me the part sooner...
|
|
![]() |
|
Orange Blood ![]() Orange Level ![]() ![]() Joined: 29 Nov 2010 Location: ColoradoSprings Points: 4053 |
![]() ![]() ![]() ![]() ![]() |
Schmidt and Sons wasn't it. They always have everything I need in stock, for all the older tractors I work on. Great people over there!!!
|
|
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
|
![]() |
|
MrHDC ![]() Orange Level ![]() ![]() Joined: 14 Mar 2015 Location: Wichita, KS Points: 254 |
![]() ![]() ![]() ![]() ![]() |
Yeah, The Schmidt & Sons in Mt Hope is where I go. They also have one in Wellington. They've been great. I've had work done there too and been very happy.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |